Bra-A-Week Challenge - Emerald Erin Black Beauty and Orange Lingerie Devonshire

Confined to the house with a lot of time on my hands and inspired by Emerald Erin I am trying to up my game and play around with patterns for some different looks. So I am proud to present an Emerald Erin Black Beauty with neon stretch lace and Orange Lingerie Devonshire with half cups.

The neon lace from Tailor Made for this week is a stark contrast to the pale lilac of the previous week but the sun was out when I started and just said “please use me”. I had wanted to make a bra with a sheer edge cup and thought the Black Beauty (although it requires stable fabric) would be a good place to start as I could use a mixture of the two versions and tweak for the stretch lace. The first decision was to choose the tulle. I came across the pistachio I had left from a previous Black Beauty and I thought it would look perfect as it picked up the small amount of green in the neon.

I used two layers of folded tulle for each cup. To make sure the tulle folded flat I folded the smooth side over the less smooth side and then they stuck together. I placed the lace over the upper cup piece and cut in place that way up. Using a layer of lace and tulle I encased the upper cup.

I decided to use the lace edge on the power bar so, again, I placed over the pattern piece to get the low point of the scallop in the right place. Then I cut the tulle from this piece. This then influenced which colour elastic to use as the yellow looked better underneath than the pink. With the cups done I moved on to deciding how to make the cradle and bands.

Deciding on the mint fastener I first had to adjust the back band to accommodate the extra height. I decided to use the lace for the back bands together with a layer of soft powernet. Rather than use the lace all over I decided to bring in some more tulle and used this on the bridge. For stability I used two layers as one with sheer cup lining for stability. Again the yellow elastic looked better under the tulle. The beige channeling was chosen as this was the least obtrusive. To keep the front edge clean I closed off, sewing through the channeling and seam allowance only and then hand stitched to the front .

I thought the perfect partner would be the Studio Costura Vera Panties utilising the mint strapping. As the lace does not mirror I redrafted the back piece so I could use elastic and have the scallop edge on the waist. I took off the back seam and added the width of the elastic to the leg on the back pattern piece. I only had four gold sliders and no rings so I also had to adjust how I fit the straps. I used sliders for the front and tucked them in on the second pass of the elastic giving a really clean finish.

For the back I attached wrong side to wrong side and then folded back to stitch in place for another clean finish. Another fabulous combination but still hoping enough for another panty.

Not much left but I managed to squeeze out an Evie la Luve Chloe thong. I must admit to not being a big thong fan but with enough depth to the sides this makes for a pretty comfortable fit. I cut out the mesh first and then fitted what I had left over the front with just enough for the back as well. The mint fold over elastic was perfect.

I just love this set and very different to the set of the previous week.

I had been waiting for the right design to come along for this very beautiful lilac tulle from Tailor Made and as with most of my makes someone releases a new pattern or hack that ticks all the boxes. Orange Lingerie posted a tutorial on how to turn the 3/4 Devonshire into a half cup and my mind was set. The adjustments are quite simple, however, I did make up a paper cup to check there was adequate coverage. Then on to choosing what colours to use with it. So out came white and various shades of pink and lilac.

I made choices as I went along as one affected another. First I decided on a very soft pink tulle which gave a pink hue and I preferred the more pink/lilac elastic over the pure lilac. Then I had some very pale lilac shimmery powernet which looks amazing but it is not showing up well in the pictures. I tried to break up the all over look of the lace by positioning the flower on the side of the frames only. The placing of the cup pieces on the lace is problematic as the lace cannot be mirrored but I think I achieved a good balance. Although I do have a pattern to make a fastener I did a quick makeover of a white fastener. I covered the front of the eye side only so the plush back was still against my skin and covered both sides of the hook side.

Then on to the very glamorous straps which was my attempt to achieve a RTW look I had seen. I used a strip of the lace tulle with one of the lining tulle for colour consistency. The front strap is fabric for this pattern so I ensured the strips were cut with no stretch in the length and used 1/4 seams on both long edges and turned right side out. I still wanted the comfort of plush elastic so I place over a piece of strap elastic and sewed down the middle. Then I marked a line every two inches and stitched across so I could gather to the width of the elastic. Well impressed with the look and still comfortable!

The obvious choice for underwear was another Orange Lingerie pattern, the Montgomery Brief as you can use non stretch fabric for the front panel. I’ve made this numerous times but I think this has to be the prettiest and so comfortable with the super soft mesh I found in my stash. With just a small amount of lace tulle left I managed to use this for an overlay on the Evie la Luve Binky, another favourite of mine using the direction of the stretch across the body. I used the white fold over elastic as I didn’t want it to overwhelm the single layer mesh. Amazingly pretty and feminine as well as comfortable. What more can you ask for when we are all spending so much time in t-shirts and joggers!