Pattern Drafting, Sketches and New Year's Resolutions

It’s been a while since I last posted but I’ve had a manic few weeks of doing so many new things so I thought it was time to take a break and journal all the makes. My New Year’s Resolutions were to take time to practice sketching designs, further develop skills to take designs to patterns and explore different approaches to drafting. So here is what I have achieved so far.

The year got off to a good start as Porcelynne had a week long Draft Along which was live drafting using the method in Jennifer’s book Bare Essentials. This was drafting from measurements to create a fitting pattern that could then be turned into a sloper to create any design. Alternatively you can use your fitted Eve cup, or any other well fitting pattern, to create the sloper, which I had already done, but was interested to see how the two would compare.

What I took away from the week was a better understanding of how to manipulate patterns I already had and this set is my first attempt to take an idea through to a finished make.

Although this method is a mathematical approach to determining measurements for bra drafting, for most of us, the first draft is a starting point. My initial draft had a similar shape to my Eve but needed some work to get a good fit. I had my Tailormade TMCollaBRAtory January kit to use and an idea for the design so I thought I could make a sloper from my perfect fitting Emerald Erin Black Beauty. The first step was to integrate the strap part of the power bar into the upper cup.

I wanted to create a diagonal seam through the apex which would create a super powerbar side with a curved lace upper cup. To help decide where to place the seam I used a technique I had seen in Beverly Johnson’s Bra-makers Manual where you make up a cup in foam and draw the style lines and cut up. Using the Bare Essentials method I then had to put the curves back on. I made up a test cup to check the fit both in terms of cup size and that it fit into the frame. So I was ready to use the beautiful lingerie satin kit.

Before I decided where to use the lace on the bra I cut out the lace back for the Ohhhlulu Claudia which is a great pattern where you can use the non stretch fabric of your bra on the small front panel. I often size up with the Claudia depending on the stretch of my lace and whether the front panel has any stretch at all.

The next set came about because I had run out of regular wires and thought why not try drafting for the short/demi/plunge wires I did have and use the kit for my February TMCollaBRAtory. I sketched a few ideas for front closing, partial bands with strappy backs but then realised I needed to get the basics right first.

The band draft was straight forward but I was struggling with the cups so I decided to look through the many patterns I have and see if I could use them. The idea was a lace cup with a separate foam lower cup with a push up effect.

I first came up with using the Madalynne X Simplicity 8436 which is a partial band for stretch lace which I had made a while ago. So I adjusted the cups to fit my full band draft. Then I needed a foam lower cup piece. The answer was the Porcelynne Ariel cup which is a three piece cup for a lovely round shape. So I made up the full cup in foam and inserted into the band with the lace over and as before drew on the style I wanted. This took off most of the upper cup so I adjusted the middle piece to incorporate the bits of the upper cup I needed.

I made up the other cup from my new pattern pieces, lined the lace cup, attached elastic to the neckline and finished the rest of the bra. From this I narrowed the bridge, created a gothic arch and narrowed the band as far as I could so it would appear to be a partial band. For that push up look I also tried making some cookies from Beverly Johnson’s class but the fit was so good I don’t think they are needed.

With all the pattern pieces adjusted I moved onto the beautiful lace kit for my February TMCollaBRAtory project. As I used the lace for the back band as well as the full lace cups I only had a small piece left to make a set. I instantly thought of the EvielaLuve Chloe thong which I had adapted for a comfier fit! I checked how much of the pattern piece I could cover before I cut out the front piece in mesh. I placed the lace over the mesh so that the scallop would sit below the fold over elastic and cut around. This left a tiny piece to partial cover the back. The fit and look of this set is sensational and I have plans to make it again very soon.

Moving on to my latest make which could be a blog post on its own but I think I will include it here. It wasn’t what I planned to make next but this mustard and black kit from Diane’s Bratastic Fabrics had such great Art Deco vibes that I decided to run with it.

I had already bought some Sashiko inspired embroidery designs from Designs by Juju that I wanted to try out on lingerie satin so the idea was to try a find a design that would work with the lace. A posting on FB reminded me of the Orange Lingerie Lansdowne which I intended to revisit to get a good fit but more importantly the large lower cup would be perfect.

I started by altering the pattern to fit which meant taking a wedge out of the underarm and altering the back band. Then I stitched out a few of the designs to see which worked best with the lace. With the design chosen I had to decide how to place the pattern piece to look best with the lace and check it would fit in the 8” x 8” hoop. I was struggling to decide so I printed out the design and cut out the pattern piece. I used a low loft fusible fleece for stabiliser as this would compact well for sewing and would be like a padded cup for what is described as a “cleavage enhancing, plunging underwire bra”. I was able to get a cup and side from each square. To ensure none of the stitches unravelled I traced off the pattern pieces and then stitched inside before I cut out.

To cover the stabiliser I lined with the fabric which enabled me to enclose all the seams and still be comfortable. I did have to switch to a bigger needle and use a walking foot but I did get through all the layers and it looks good on the inside as well. For the set I made another Ohhhlulu Claudia but I didn’t have much lace so I opted for a lace overlay on the front panel and used mesh on the fold for the back. This encloses the back seam and gives a smooth profile under clothing.

Now I have the fit right this is another stunning bra and immensely pleased with how it turned out. Through out the makes I have also been working on underwear drafting but I will share this in a separate blog.

Bra-A-Week Challenge - Emerald Erin Black Beauty and Orange Lingerie Devonshire

Confined to the house with a lot of time on my hands and inspired by Emerald Erin I am trying to up my game and play around with patterns for some different looks. So I am proud to present an Emerald Erin Black Beauty with neon stretch lace and Orange Lingerie Devonshire with half cups.

The neon lace from Tailor Made for this week is a stark contrast to the pale lilac of the previous week but the sun was out when I started and just said “please use me”. I had wanted to make a bra with a sheer edge cup and thought the Black Beauty (although it requires stable fabric) would be a good place to start as I could use a mixture of the two versions and tweak for the stretch lace. The first decision was to choose the tulle. I came across the pistachio I had left from a previous Black Beauty and I thought it would look perfect as it picked up the small amount of green in the neon.

I used two layers of folded tulle for each cup. To make sure the tulle folded flat I folded the smooth side over the less smooth side and then they stuck together. I placed the lace over the upper cup piece and cut in place that way up. Using a layer of lace and tulle I encased the upper cup.

I decided to use the lace edge on the power bar so, again, I placed over the pattern piece to get the low point of the scallop in the right place. Then I cut the tulle from this piece. This then influenced which colour elastic to use as the yellow looked better underneath than the pink. With the cups done I moved on to deciding how to make the cradle and bands.

Deciding on the mint fastener I first had to adjust the back band to accommodate the extra height. I decided to use the lace for the back bands together with a layer of soft powernet. Rather than use the lace all over I decided to bring in some more tulle and used this on the bridge. For stability I used two layers as one with sheer cup lining for stability. Again the yellow elastic looked better under the tulle. The beige channeling was chosen as this was the least obtrusive. To keep the front edge clean I closed off, sewing through the channeling and seam allowance only and then hand stitched to the front .

I thought the perfect partner would be the Studio Costura Vera Panties utilising the mint strapping. As the lace does not mirror I redrafted the back piece so I could use elastic and have the scallop edge on the waist. I took off the back seam and added the width of the elastic to the leg on the back pattern piece. I only had four gold sliders and no rings so I also had to adjust how I fit the straps. I used sliders for the front and tucked them in on the second pass of the elastic giving a really clean finish.

For the back I attached wrong side to wrong side and then folded back to stitch in place for another clean finish. Another fabulous combination but still hoping enough for another panty.

Not much left but I managed to squeeze out an Evie la Luve Chloe thong. I must admit to not being a big thong fan but with enough depth to the sides this makes for a pretty comfortable fit. I cut out the mesh first and then fitted what I had left over the front with just enough for the back as well. The mint fold over elastic was perfect.

I just love this set and very different to the set of the previous week.

I had been waiting for the right design to come along for this very beautiful lilac tulle from Tailor Made and as with most of my makes someone releases a new pattern or hack that ticks all the boxes. Orange Lingerie posted a tutorial on how to turn the 3/4 Devonshire into a half cup and my mind was set. The adjustments are quite simple, however, I did make up a paper cup to check there was adequate coverage. Then on to choosing what colours to use with it. So out came white and various shades of pink and lilac.

I made choices as I went along as one affected another. First I decided on a very soft pink tulle which gave a pink hue and I preferred the more pink/lilac elastic over the pure lilac. Then I had some very pale lilac shimmery powernet which looks amazing but it is not showing up well in the pictures. I tried to break up the all over look of the lace by positioning the flower on the side of the frames only. The placing of the cup pieces on the lace is problematic as the lace cannot be mirrored but I think I achieved a good balance. Although I do have a pattern to make a fastener I did a quick makeover of a white fastener. I covered the front of the eye side only so the plush back was still against my skin and covered both sides of the hook side.

Then on to the very glamorous straps which was my attempt to achieve a RTW look I had seen. I used a strip of the lace tulle with one of the lining tulle for colour consistency. The front strap is fabric for this pattern so I ensured the strips were cut with no stretch in the length and used 1/4 seams on both long edges and turned right side out. I still wanted the comfort of plush elastic so I place over a piece of strap elastic and sewed down the middle. Then I marked a line every two inches and stitched across so I could gather to the width of the elastic. Well impressed with the look and still comfortable!

The obvious choice for underwear was another Orange Lingerie pattern, the Montgomery Brief as you can use non stretch fabric for the front panel. I’ve made this numerous times but I think this has to be the prettiest and so comfortable with the super soft mesh I found in my stash. With just a small amount of lace tulle left I managed to use this for an overlay on the Evie la Luve Binky, another favourite of mine using the direction of the stretch across the body. I used the white fold over elastic as I didn’t want it to overwhelm the single layer mesh. Amazingly pretty and feminine as well as comfortable. What more can you ask for when we are all spending so much time in t-shirts and joggers!